Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV EMISSION CONTROL
EXHAUST GAS TEMPERATURE SENSOR (for DPF) - REMOVAL
| 1. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
()
| 2. REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
| *A | for Bank 1 |
| *B | for Bank 2 |
Using a 14 mm union nut wrench, remove the 2 No. 4 exhaust gas temperature sensors.
| 3. REMOVE MONOLITHIC CONVERTER ASSEMBLY |
()
| 4. REMOVE EXHAUST GAS TEMPERATURE SENSOR |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
| *A | for Bank 1 |
| *B | for Bank 2 |
Using a 14 mm union nut wrench, remove the 2 exhaust gas temperature sensors.
| 5. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1) |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.
| 6. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2) |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.