Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV EMISSION CONTROL

EXHAUST GAS TEMPERATURE SENSOR (for DPF) - INSTALLATION

1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)
  • NOTICE:
  • If the sensor is dropped, replace it with a new one.

Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

  • Torque:
  • 30 N*m{ 306 kgf*cm, 22 ft.*lbf}
  • NOTICE:
  • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench ().
  • HINT:
  • The identification tape on the exhaust gas temperature sensor is gray.
2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)
  • NOTICE:
  • If the sensor is dropped, replace it with a new one.

Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

  • Torque:
  • 30 N*m{ 306 kgf*cm, 22 ft.*lbf}
  • NOTICE:
  • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench ().
  • HINT:
  • The identification tape on the exhaust gas temperature sensor is white.
3. INSTALL EXHAUST GAS TEMPERATURE SENSOR
  • NOTICE:
  • If the sensor is dropped, replace it with a new one.

Using a 14 mm union nut wrench, install the 2 exhaust gas temperature sensors.

  • Torque:
  • 30 N*m{ 306 kgf*cm, 22 ft.*lbf}
  • NOTICE:
  • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench ().
  • HINT:
  • The identification tape on the exhaust gas temperature sensor is pink.
4. INSTALL MONOLITHIC CONVERTER ASSEMBLY

()


5. INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR
  • NOTICE:
  • If the sensor is dropped, replace it with a new one.

Using a 14 mm union nut wrench, install the 2 No. 4 exhaust gas temperature sensors.

  • Torque:
  • 30 N*m{ 306 kgf*cm, 22 ft.*lbf}
  • NOTICE:
  • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench ().
  • HINT:
  • The identification tape on the exhaust gas temperature sensor is gold.
6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

()


1VD-FTV EMISSION CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
EXHAUST GAS TEMPERATURE SENSOR for DPF