Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV EMISSION CONTROL
EXHAUST GAS TEMPERATURE SENSOR (for DPF) - INSPECTION
1. INSPECT EXHAUST GAS TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 50°C (122°F) 42 to 68 kΩ
- HINT:
- The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.
If the result is not as specified, replace the exhaust gas temperature sensor.
2. INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 50°C (122°F) 42 to 68 kΩ
- HINT:
- The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.
If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.
3. INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 50°C (122°F) 42 to 68 kΩ
- HINT:
- The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.
If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.
4. INSPECT NO. 4 EXHAUST GAS TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 50°C (122°F) 42 to 68 kΩ
- HINT:
- The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.
If the result is not as specified, replace the No. 4 exhaust gas temperature sensor.