Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE STARTING
ENGINE SWITCH - REMOVAL
1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Place protective tape as shown in the illustration.
Using a moulding remover, detach the 7 claws and remove the panel cushion.
2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Remove the clip.
Remove the screw.
Detach the 8 claws.
Remove the panel pad and disconnect the connectors and 2 clamps.
3. REMOVE ENGINE SWITCH |
Disconnect the switch connector.
Detach the 2 claws and remove the switch.