INSPECT ENGINE COOLANT TEMPERATURE SENSOR

Partially immerse the sensor in water and warm up the water.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	Approx. 20°C (68°F)	2.32 to 2.59 kΩ
  	Approx. 80°C (176°F)	0.310 to 0.326 kΩ

If the result is not as specified, replace the sensor.

• NOTICE:

• When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.