Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV EMISSION CONTROL
EGR COOLER - INSTALLATION
1. INSTALL STUD BOLT |
Using an E6 "TORX" socket wrench, install the 4 stud bolts to the EGR cooler.
- Torque:
- 6.0 N*m{ 61 kgf*cm, 53 in.*lbf}
2. INSTALL NO. 8 WATER BY-PASS HOSE |
Install the 2 No. 8 water by-pass hoses.
3. INSTALL NO. 3 WATER BY-PASS PIPE |
Connect the 2 hoses and install the No. 3 water by-pass pipe with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
4. INSTALL NO. 1 AND NO. 2 EGR VALVE ASSEMBLIES |
()