Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL


ECD SYSTEM (w/o DPF) - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
  • *: Use the intelligent tester.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.CUSTOMER PROBLEM ANALYSIS
NEXT
3.CONNECT INTELLIGENT TESTER TO DLC3
  • HINT:
  • If the display indicates a communication fault with the tester, inspect the DLC3.
NEXT
4.CHECK DTC AND FREEZE FRAME DATA*
  • HINT:
  • Record or print DTCs and freeze frame data if necessary.
NEXT
5.CLEAR DTC AND FREEZE FRAME DATA*
NEXT
6.VISUAL INSPECTION
NEXT
7.SET CHECK MODE DIAGNOSIS*

Refer to the check mode procedure ().

NEXT
8.CONFIRM PROBLEM SYMPTOMS
  • HINT:
  • If the engine does not start, first perform the "Check DTC" procedures and "Basic Inspection" procedures below.
Result
ResultProceed to
Malfunction occursA
Malfunction does not occurB
B.
SIMULATE SYMPTOMS
A
9.CHECK DTC*
Result
ResultProceed to
Trouble codeA
No trouble codeB
B.
Go to step 11
A
10.REFER TO DTC CHART
NEXT
Go to step 13
11.BASIC INSPECTION
Result
ResultProceed to
Malfunctioning parts not confirmedA
Malfunctioning parts confirmedB
B.
Go to step 16
A
12.REFER TO PROBLEM SYMPTOMS TABLE
  • HINT:
  • Refer to the Problem Symptoms Table ().
Result
ResultProceed to
Malfunctioning circuit confirmedA
Malfunctioning parts confirmedB
B.
Go to step 16
A
13.CHECK ECM POWER SOURCE CIRCUIT
NEXT
14.CONDUCT CIRCUIT INSPECTION
Result
ResultProceed to
Malfunction not confirmedA
Malfunction confirmedB
B.
Go to step 17
A
15.CHECK FOR INTERMITTENT PROBLEMS
NEXT
Go to step 18
16.PARTS INSPECTION
NEXT
17.IDENTIFY PROBLEM
NEXT
18.ADJUST AND/OR REPAIR
NEXT
19.CONFIRMATION TEST
NEXT
END
1VD-FTV ENGINE CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
ECD SYSTEM w/o DPF