Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
DTC P060E Internal Control Module Throttle Position Performance
DESCRIPTION
The ECM monitors the input signals of the throttle position sensor No. 1 and stop light switch. As the ECM monitors the input signals of the throttle position sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals deviate, this DTC is stored.
| DTC No. | DTC Detection Condition | Trouble Area |
| P060E | There is an ECM main CPU error (1 trip detection logic). | ECM |
INSPECTION PROCEDURE
| 1.CHECK FOR DTC |
Clear the DTCs ().
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch to ON.
Check for DTCs.
- OK:
- P060E is not output.
|
| ||||
| OK | ||
| ||