Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
DTC P060E Internal Control Module Throttle Position Performance
DESCRIPTION
The ECM monitors the input signals of the Throttle Position (TP) sensor No. 1 and stop light switch. As the ECM monitors the input signals of the TP sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals are deviated, a DTC is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
| P060E | When either condition below is met: An ECM main CPU error. An ECM sub CPU error. | ECM |
INSPECTION PROCEDURE
| 1.CHECK DTC |
Clear DTC ().
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG).
Check DTC.
- OK:
- P060E is not output.
|
| ||||
| OK | ||
| ||