Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
DTC P060D Internal Control Module Accelerator Pedal Position Performance
DESCRIPTION
The ECM monitors the input signals of the accelerator pedal position sensor No. 1. When the input signals and control signals deviate, this DTC is stored.
DTC No. | DTC Detection Condition | Trouble Area |
P060D | There is an ECM main CPU error (1 trip detection logic). | ECM |
INSPECTION PROCEDURE
1.CHECK FOR DTC |
Clear the DTCs ().
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch to ON.
Check for DTCs.
- OK:
- P060D is not output.
|
| ||||
OK | ||
|