DTC P060B Internal Control Module A/D Processing Performance

DESCRIPTION

This DTC is stored when a communication error occurs in the ECM.

DTC No.	DTC Detection Condition	Trouble Area
P060B	There is an ECM main CPU communication error (1 trip detection logic).	ECM Knock sensor

Turn the engine switch off.

Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

Connect the cable to the negative (-) battery terminal.

Turn the engine switch on (IG) and wait for 16 seconds or more.

1.CHECK FOR DTC

Connect the GTS to the DLC3.

Turn the engine switch on (IG).

Turn the GTS on.

Clear DTCs ().

Turn the GTS off.

Turn the engine switch off.

Disconnect the GTS.

Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

Connect the cable to the negative (-) battery terminal.

Connect the GTS to the DLC3.

Turn the engine switch on (IG) and turn the GTS on.

Wait 16 seconds or more.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

Check for DTCs.

Result
Result	Proceed to
DTC is not output	A
DTC P060B is output	B
DTC P060B and P0327, P0328, P032C, P032D, P0332, P0333, P033C or P033D are output	C

B

REPLACE ECM ()

C

GO TO DTC P0327, P0328, P032C, P032D, P0332, P0333, P033C OR P033D ()

A

CHECK FOR INTERMITTENT PROBLEMS ()