Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
DTC P060B Internal Control Module A/D Processing Performance
DESCRIPTION
This DTC is stored when a communication error occurs in the ECM.
| DTC No. | DTC Detection Condition | Trouble Area |
| P060B | There is an ECM main CPU communication error (1 trip detection logic). | ECM Knock sensor |
INSPECTION PROCEDURE
| 1.CHECK FOR DTC |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Clear the DTCs ().
Turn the GTS off.
Turn the ignition switch off.
Disconnect the GTS.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Wait 16 seconds or more.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Check for DTCs.
| Result | Proceed to |
| DTC is not output | A |
| DTC P060B is output | B |
| DTC P060B and P0327 or P0328 are output | C |
- OK:
- P060B is not output.
|
| ||||
|
| ||||
| A | ||
| ||