Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
DTC P060A Internal Control Module Monitoring Processor Performance
DESCRIPTION
The main CPU and sub CPU of the ECM perform data communication between each other. The main CPU monitors the communications and WDC pulses from the sub CPU. When the signal malfunctions below are detected, this DTC is stored.
| DTC No. | DTC Detection Condition | Trouble Area |
| P060A | There is an ECM sub CPU error (1 trip detection logic). | ECM |
INSPECTION PROCEDURE
| 1.CHECK FOR DTC |
Clear the DTCs ().
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch to ON.
Check for DTCs.
- OK:
- P060A is not output.
|
| ||||
| OK | ||
| ||