Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
DTC P0606 ECM / PCM Processor
DESCRIPTION
The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from the CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store DTC(s) immediately.
| DTC Code | DTC Detection Condition | Trouble Area |
| P0606 | When either condition below is met: An ECM main CPU error. An ECM sub CPU error. | ECM |
INSPECTION PROCEDURE
| 1.CHECK DTC |
Clear DTC ().
Turn the engine switch off.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the engine switch on (IG).
Check DTC.
- OK:
- P0606 is not output.
|
| ||||
| OK | ||
| ||