DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC (CRUISE CONTROL SYSTEM)
DTC P0575 Cruise Control Input Circuit
DTC P0607 Control Module Performance
DESCRIPTION
This DTC indicates the internal abnormalities of the ECM.
| DTC Code | DTC Detection Condition | Trouble Area |
| P0575 | When either of the following conditions is met:
STP signals input to the ECM supervisory CPU and control ECU are different for 0.15 seconds or more.
0.4 seconds have passed after cruise cancel input signal (STP input) is input to the ECM.
| ECM (for 1GR-FE, 1UR-FE, 3UR-FE) |
| P0607 | When the cruise control main switch is turned off, the ECM recognizes that the cruise control system is operating. | ECM (for 1VD-FTV, w/o DPF) |
- The ECM receives signals from each sensor to control all functions of the cruise control system. When this trouble code is stored, fail-safe remains on until the ignition switch is turned off.
INSPECTION PROCEDURE
| 1.CHECK DTC (CRUISE CONTROL SYSTEM) |
Using the intelligent tester, enter the following menus: Powertrain / Cruise Control / Trouble Code.
Recheck for DTCs ().
Result| Result | Proceed to |
OK
(DTC is not output) | A |
NG
(DTC P0575 is output for 1GR-FE) | B |
NG
(DTC P0575 is output for 1UR-FE) | C |
NG
(DTC P0575 is output for 3UR-FE) | D |
NG
(DTC P0607 is output for 1VD-FTV, w/o DPF) | E |
| A | |
| |
| USE SIMULATION METHOD TO CHECK ()
|
|