Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - CRUISE CONTROL
CRUISE CONTROL SYSTEM - PROBLEM SYMPTOMS TABLE
- HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| Main switch cannot be turned on (cruise control indicator light on combination meter does not illuminate). | Cruise control switch circuit | |
| Cruise main indicator light circuit | ||
| Meter/gauge system | ||
| ECM | ||
| CAN communication line (for LHD) | ||
| CAN communication line (for RHD) | ||
| Vehicle speed setting cannot be done (cruise control indicator light on combination meter illuminates when main switch is turned on, but turns off when operating SET function). | Cruise control switch circuit | |
| Meter/gauge system | ||
| ECM | ||
| Vehicle speed setting cannot be done (cruise control indicator light on combination meter illuminates when main switch is turned on, and remains illuminated when operating SET function). | Cruise control switch circuit | |
| Vehicle speed sensor circuit | ||
| Meter/gauge system | ||
| Stop light switch circuit | ||
| Park/neutral position switch circuit (for 1UR-FE A/T) | ||
| Park/neutral position switch circuit (for 3UR-FE A/T) | ||
| Park/neutral position switch circuit (for 1GR-FE A/T) | ||
| Park/neutral position switch circuit (for 1VD-FTV A/T) | ||
| Clutch switch circuit (for M/T) | ||
| ECM | ||
| CAN communication line (for LHD) | ||
| CAN communication line (for RHD) | ||
| While the vehicle is driving with cruise control, the SET control is canceled (cruise control indicator light remains illuminated). | Cruise control switch circuit | |
| Vehicle speed sensor circuit | ||
| Stop light switch circuit | ||
| Cruise main indicator light circuit | ||
| Park/neutral position switch circuit (for 1UR-FE A/T) | ||
| Park/neutral position switch circuit (for 3UR-FE A/T) | ||
| Park/neutral position switch circuit (for 1GR-FE A/T) | ||
| Park/neutral position switch circuit (for 1VD-FTV A/T) | ||
| Clutch switch circuit (for M/T) | ||
| ECM | ||
| Hunting (speed is not constant). | Vehicle speed sensor circuit | |
| ECM | ||
| Vehicle speed setting cannot be canceled (CANCEL function failure). | Cruise control switch circuit | |
| Clutch switch circuit (for M/T) | ||
| ECM | ||
| DTC is not output, or is output when it should not be. | TC and CG terminal circuit | |
| ECM | ||
| Cruise control indicator light does not come on. | Cruise control switch circuit | |
| Cruise main indicator light circuit | ||
| Meter/gauge system | ||
| ECM | ||
| CAN communication line (for LHD) | ||
| CAN communication line (for RHD) | ||
| Cruise control SET indicator light does not come on. | Cruise SET indicator light circuit | |
| Meter/gauge system | ||
| ECM | ||
| CAN communication line (for LHD) | ||
| CAN communication line (for RHD) |