DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
PERFORM ACTIVE TEST USING INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT)
READ VALUE USING INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT)
CRUISE CONTROL SYSTEM - Cruise Main Indicator Light Circuit
DESCRIPTION
The ECM detects a cruise control switch signal and sends it to the combination meter via the CAN communication line. Then the cruise control indicator light comes on.
The cruise control indicator light circuit uses the CAN for communication. If there is a malfunction in this circuit, check for DTCs in the CAN communication system before troubleshooting this circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT) |
Using the intelligent tester, perform the Active Test ().
Combination Meter| Tester Display | Test Part | Control Range | Diagnostic Note |
| Indicat. Lamp Cruise | Cruise control indicator light operation | OFF / ON | - |
- OK:
- Indicator light comes on/goes off.
Result| Result | Proceed to |
| OK | A |
NG
(w/ Multi-information Display) | B |
NG
(w/o Multi-information Display) | C |
| | REPLACE COMBINATION METER ASSEMBLY ()
|
|
|
| | REPLACE COMBINATION METER ASSEMBLY ()
|
|
|
| 2.READ VALUE USING INTELLIGENT TESTER (CRUISE CONTROL INDICATOR LIGHT) |
Using the intelligent tester, read the Data List ().
Cruise Control| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| CCS Indicator M-CPU | Cruise control indicator light (Main CPU) / ON or OFF | ON: Cruise control indicator light is on
OFF: Cruise control indicator light is off | - |
- OK:
- The intelligent tester display changes according to condition of cruise control indicator light.
Result| Result | Proceed to |
| OK | A |
NG
(for 1GR-FE) | B |
NG
(for 1UR-FE) | C |
NG
(for 3UR-FE) | D |
NG
(for 1VD-FTV) | E |
| A | |
| |
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|