Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
CRANKSHAFT POSITION SENSOR - INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR |
Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.
- NOTICE:
When reusing the sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the sensor.
Install the sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR |
Install the sensor protector with the 2 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
3. INSTALL NO. 2 ENGINE UNDER COVER |
Install the No. 2 engine under cover with the 2 bolts.
- Torque:
- 29 N*m{ 296 kgf*cm, 21 ft.*lbf}