Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
CRANKSHAFT POSITION SENSOR - INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR |
Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.
- NOTICE:
When reusing the sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the crankshaft position sensor.
Install the crankshaft position sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the sensor connector.
2. INSTALL COOLER COMPRESSOR ASSEMBLY |
()
3. INSTALL GENERATOR ASSEMBLY |
for 100 A Type ()
for 130 A Type ()