Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - CRUISE CONTROL
CLUTCH SWITCH (for LHD) - INSTALLATION
| 1. INSTALL CLUTCH SWITCH ASSEMBLY |
Install the clutch switch assembly and tighten the adjusting nut.
- Torque:
- 16 N*m{ 163 kgf*cm, 12 ft.*lbf}
Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.
- Torque:
- 16 N*m{ 163 kgf*cm, 12 ft.*lbf}
- NOTICE:
- After adjusting the pedal free play, perform the clutch switch assembly adjustment ().
| 2. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY WITH CLUTCH MASTER CYLINDER |
Install the clutch pedal support sub-assembly with clutch master cylinder ().