INSTALL VVT SENSOR

INSTALL CAMSHAFT POSITION SENSOR

INSTALL AIR CLEANER CAP AND HOSE

INSTALL V-BANK COVER SUB-ASSEMBLY

Install the 4 VVT sensors with the 4 bolts.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Connect the 4 VVT sensor connectors.

Install the camshaft position sensor with the bolt.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Connect the camshaft position sensor connector.

Install the air cleaner cap and hose, and then tighten the hose clamp.

• Torque:
• 2.5 N*m{ 25 kgf*cm, 22 in.*lbf}

Attach the 4 clamps.

Connect the mass air flow meter connector and attach the clamp.

Connect the No. 2 PCV hose and No. 1 air hose.

Attach the 2 V-bank cover hooks to the bracket. Then align the 3 V-bank cover grommets with the 3 pins, and press down on the V-bank cover to attach the pins.