Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
CAMSHAFT POSITION SENSOR - INSTALLATION
| 1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2) |
Apply a light coat of engine oil to the O-ring of the VVT sensor.
- NOTICE:
Install the VVT sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the VVT sensor connector.
| 2. INSTALL VVT SENSOR (for Intake Side of Bank 2) |
Apply a light coat of engine oil to the O-ring of the VVT sensor.
- NOTICE:
Install the VVT sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the VVT sensor connector.
| 3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1) |
Apply a light coat of engine oil to the O-ring of the VVT sensor.
- NOTICE:
Install the VVT sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the VVT sensor connector.
| 4. INSTALL VVT SENSOR (for Intake Side of Bank 1) |
Apply a light coat of engine oil to the O-ring of the VVT sensor.
- NOTICE:
Install the VVT sensor with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the VVT sensor connector.
| 5. INSTALL NO. 1 AIR CLEANER HOSE |
Install the No. 1 air cleaner hose with the 2 hose clamps.
- Torque:
- 2.5 N*m{ 25 kgf*cm, 22 in.*lbf}
| *a | Protrusion |
| *b | Groove |
| *c | Top |
| *d | Front |
Install the bolt.
- Torque:
- 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}
Connect the vacuum hose and No. 2 PCV hose.
| 6. INSTALL V-BANK COVER |
Attach the 2 V-bank cover hooks to the bracket. Then align the 2 V-bank cover grommets with the 2 pins and press down on the V-bank cover to attach the pins.
| *1 | Pin |
| *2 | Hook |