Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL

CAMSHAFT OIL CONTROL VALVE - ON-VEHICLE INSPECTION

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

Connect the intelligent tester to the DLC3.

Start the engine and turn the intelligent tester on.

Warm up the engine.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1) or Control the VVT Linear (Bank 2) or Control the VVT System (Bank 1) or Control the VVT System (Bank 2) or Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).

Check the engine speed while operating the Oil Control Valve (OCV) using the intelligent tester.

  • OK:
  • Tester OperationSpecified Condition
    OCV OFFNormal engine speed
    OCV ONSoon after OCV switched from OFF to ON, engine idles roughly or stalls

If the result is not as specified, check the oil control valve, wiring and camshaft timing gear.


  • HINT:
Control the VVT Linear (Bank 1): Command to activate exhaust and intake side oil control valves of bank 1 (Control range: Between -128 to 127%).
Control the VVT Linear (Bank 2): Command to activate exhaust and intake side oil control valves of bank 2 (Control range: Between -128 to 127%).
Control VVT System (Bank 1): Command to activate oil control valve of bank 1 (Control range: ON/OFF).
Control VVT System (Bank 2): Command to activate oil control valve of bank 2 (Control range: ON/OFF).
Control the VVT Exhaust Linear (Bank 1): Command to activate exhaust side oil control valve of bank 1 (Control range: Between -128 to 127%).
Control the VVT Exhaust Linear (Bank 2): Command to activate exhaust side oil control valve of bank 2 (Control range: Between -128 to 127%).
3UR-FE ENGINE CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
CAMSHAFT OIL CONTROL VALVE