Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL

ACCELERATOR PEDAL - ON-VEHICLE INSPECTION

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester on.

Enter the following menus: Powertrain / Engine and ECT/ Data List / Primary / Accel Sens. No.1 Volt % and Accel Sens. No.2 Volt %.

Read the value displayed on the tester.

  • Standard Value:
  • Tester DisplayConditionSpecified Condition
    Accel Sens. No.1 Volt %Released10 to 22%
    Depressed52 to 90%
    Accel Sens. No.2 Volt %Released24 to 40%
    Depressed68 to 99%

If the result is not as specified, check the accelerator pedal, wire harness or ECM.


1VD-FTV ENGINE CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
ACCELERATOR PEDAL