INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Connect the GTS to the DLC3.

Turn the engine switch on (IG).

Turn the GTS on.

Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accel Sens. No. 1 Volt % and Accel Sens. No. 2 Volt %.

Read the value displayed on the GTS.

• Standard Value:

• Tester Display	Condition	Specified Condition
  Accel Sens. No. 1 Volt %	Released	10 to 22%
  	Depressed	52 to 90%
  Accel Sens. No. 2 Volt %	Released	24 to 40%
  	Depressed	68 to 99%

If the result is not as specified, check the accelerator pedal, wire harness or ECM.