INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Connect the intelligent tester to the DLC3.

Turn the ignition switch to ON.

Turn the intelligent tester on.

Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accel Sens. No. 1 Volt % and Accel Sens. No. 2 Volt %.

Read the value displayed on the intelligent tester.

• Standard Value:

• Tester Display	Condition	Specified Condition
  Accel Sens. No.1 Volt %	Released	10 to 22%
  	Depressed	54 to 86%
  Accel Sens. No.2 Volt %	Released	12 to 42%
  	Depressed	66 to 98%

If the result is not as specified, check the accelerator pedal, wire harness or ECM.