Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
ACCELERATOR PEDAL - REMOVAL
| 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Remove the 2 screws.
Detach the 3 claws.
Disconnect the connectors and remove the No. 1 instrument panel under cover.
| 2. REMOVE ACCELERATOR PEDAL ASSEMBLY |
- NOTICE:
- This accelerator pedal does not require lubrication.
- Do not apply oil or other lubrication to the accelerator pedal assembly.
- If applied, the accelerator pedal assembly must be replaced.
Disconnect the accelerator pedal position sensor connector.
Remove the 2 nuts and accelerator pedal assembly.