Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL

ACCELERATOR PEDAL - INSTALLATION

1. INSTALL ACCELERATOR PEDAL ASSEMBLY
  • NOTICE:
This accelerator pedal does not require lubrication.
Do not apply oil or other lubrication to the accelerator pedal assembly.
If applied, the accelerator pedal assembly must be replaced.
Avoid physical shocks to the accelerator pedal assembly.
Do not disassemble the accelerator pedal assembly.

Install the accelerator pedal assembly with the 2 nuts.

  • Torque:
  • 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}

Connect the accelerator pedal position sensor connector.

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Accelerator Pedal - Installation. 3UR-FE ENGINE CONTROL. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connectors.

Attach the 3 claws to install the No. 1 instrument panel under cover.

Install the 2 screws.

3UR-FE ENGINE CONTROL
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
ACCELERATOR PEDAL