Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE ENGINE CONTROL
ACCELERATOR PEDAL - INSTALLATION
| 1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY |
- NOTICE:
This accelerator pedal does not require lubrication.
Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
If applied, the accelerator pedal sensor assembly must be replaced.
Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
If applied, the accelerator pedal sensor assembly must be replaced.
Avoid physical shocks to the accelerator pedal sensor assembly.
Do not disassemble the accelerator pedal sensor assembly.
Install the accelerator pedal sensor with the 2 nuts.
- Torque:
- 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}
Connect the accelerator pedal position sensor connector.
| 2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Connect the connectors.
Attach the 3 claws to install the No. 1 instrument panel under cover.
Install the 2 screws.