Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS

YAW RATE AND DECELERATION SENSOR (w/ VSC) - REMOVAL

1. PRECAUTION
  • NOTICE:
  • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
3. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

()


4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

()


5. REMOVE YAW RATE SENSOR

Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

Yaw Rate And Deceleration Sensor (W/ Vsc) - Removal. BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Yaw Rate And Deceleration Sensor (W/ Vsc) - Removal. BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Remove the 2 bolts and sensor.