Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - BRAKE REAR

REAR BRAKE - REASSEMBLY

1. INSTALL PISTON SEAL

Apply lithium soap base glycol grease to a new piston seal.

Rear Brake - Reassembly. BRAKE REAR. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the piston seal to the disc brake cylinder.

2. INSTALL CYLINDER BOOT

Apply lithium soap base glycol grease to the piston and a new cylinder boot.

Rear Brake - Reassembly. BRAKE REAR. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the cylinder boot to the piston as shown in the illustration.

3. INSTALL REAR DISC BRAKE PISTON

Install the cylinder boot to the disc brake cylinder.

  • NOTICE:
  • Install the boot securely to the grooves of the disc brake cylinder.
Rear Brake - Reassembly. BRAKE REAR. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Push in the piston by hand and install the cylinder boot onto the grooves of the piston.

  • NOTICE:
  • Install the boot securely to the grooves of the piston.
4. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG

Temporarily install the bleeder plug to the disc brake cylinder.

  • HINT:
  • The bleeder plug will be tightened to a torque specification in the "Bleed Brake Line" procedure.
5. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP
BRAKE REAR
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR BRAKE