Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARKING BRAKE
PARKING BRAKE LEVER - INSTALLATION
| 1. INSTALL PARKING BRAKE SWITCH ASSEMBLY |
Install the parking brake switch with the screw.
- Torque:
- 0.9 N*m{ 9 kgf*cm, 8 in.*lbf}
| 2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY |
Install the parking brake lever with the 2 bolts.
- Torque:
- 25 N*m{ 255 kgf*cm, 18 ft.*lbf}
Install the parking brake lever support with the 2 bolts.
- Torque:
- 25 N*m{ 255 kgf*cm, 18 ft.*lbf}
Install the straight pin to the parking brake lever.
Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod.
Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut.
Install the parking brake return spring.
Connect the parking brake switch connector.
| 3. ADJUST PARKING BRAKE |
()
| 4. INSTALL LOWER CONSOLE BOX (w/o Console Box Lid) |
()
| 5. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box) |
()
| 6. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box) |
()