DTC C1268 Transfer L4 Position Switch Circuit

DESCRIPTION

DTC Code

DTC Detection Condition

Trouble Area

C1268

The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via CAN communication for 2 seconds or more.

Transfer system

Skid control ECU (Master cylinder solenoid)

After replacing the master cylinder solenoid, perform zero point calibration ().

1.INSPECT TRANSFER L4 SHIFT

Shift the transfer to L4, and then drive the vehicle and check that there are no problems with the transfer system.

NG

GO TO TRANSFER SYSTEM (PROBLEM SYMPTOMS TABLE) ()

OK

2.RECONFIRM DTC

Clear the DTCs ().

Turn the ignition switch off.

Shift the transfer to L4, drive the vehicle, and then check for DTCs ().

B

REPLACE MASTER CYLINDER SOLENOID ()

C

REPLACE MASTER CYLINDER SOLENOID ()

A

CHECK FOR INTERMITTENT PROBLEMS ()