Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS
CRAWL SWITCH - INSPECTION
| 1. CHECK SUSPENSION CONTROL SWITCH (CRAWL SWITCH) |
| *1 | CRAWL ON/OFF Switch |
| *2 | Turn Assist Function Switch |
| *3 | CRAWL Speed Selector Switch |
| *a | Component without harness connected: (CRAWL Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 18 (ECU1) - 16 (E) Speed selector switch: Medium 10 kΩ or higher Speed selector switch: Medium-high Speed selector switch: High Speed selector switch: Low Below 1 Ω Speed selector switch: Medium-low 19 (ECU2) - 16 (E) Speed selector switch: Medium-low 10 kΩ or higher Speed selector switch: Medium Speed selector switch: Medium-high Speed selector switch: Low Below 1 Ω Speed selector switch: High 13 (ECU3) - 16 (E) Speed selector switch: Low 10 kΩ or higher Speed selector switch: Medium-low Speed selector switch: Medium Speed selector switch: Medium-high Below 1 Ω Speed selector switch: High 14 (HSW) - 16 (E) ON/OFF switch: Pressed Below 1 Ω ON/OFF switch: Not pressed 10 kΩ or higher 2 (OTA) - 16 (E) Turn assist function switch: Pressed Below 1 Ω Turn assist function switch: Not pressed 10 kΩ or higher
If the result is not as specified, replace the suspension control switch (CRAWL switch).