Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
ULTRASONIC SENSOR (for Rear) - REMOVAL
| 1. REMOVE REAR BUMPER COVER |
for Standard:
().
w/ Towing Hitch:
().
w/ Pintle Hook:
().
| 2. REMOVE NO. 2 FRAME WIRE |
for Standard:
().
w/ Towing Hitch:
().
w/ Pintle Hook:
().
| 3. REMOVE NO. 1 ULTRASONIC SENSOR |
Detach the 2 claws and remove the No. 1 ultrasonic sensor.
- HINT:
Use the same procedure for all No. 1 ultrasonic sensors.
The illustration shows the No. 1 ultrasonic sensor for the RH corner and back sensor LH and RH. The installation position of the No. 1 ultrasonic sensor for the LH corner is on the opposite side.
| 4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.
- HINT:
Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.
The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.
| 5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER |
Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.
- HINT:
- Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.