Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
ULTRASONIC SENSOR (for Rear) - INSTALLATION
| 1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER |
- HINT:
- Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
| *a | Protrusion |
| *b | Keyhole |
- NOTICE:
Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.
Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
- HINT:
- The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.
Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.
| 2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER |
- HINT:
- Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
Align the keyhole and protrusion as shown in the illustration.
| *a | Protrusion |
| *b | Keyhole |
- NOTICE:
Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.
Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.
| 3. INSTALL NO. 1 ULTRASONIC SENSOR |
- HINT:
- Use the same procedure for all No. 1 ultrasonic sensors.
Attach the 2 claws to install the No. 1 ultrasonic sensor.
- NOTICE:
- Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.
| 4. INSTALL NO. 2 FRAME WIRE |
for Standard:
().
w/ Towing Hitch:
().
w/ Pintle Hook:
().
| 5. INSTALL REAR BUMPER COVER |
for Standard:
().
w/ Towing Hitch:
().
w/ Pintle Hook:
().