INSPECT NO. 1 ULTRASONIC SENSOR

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 (BI) - 5 (EI)	Always	10 kΩ or higher
  1 (BI) - 2 (BO)	Always	10 kΩ or higher
  3 (SI) - 4 (SO)	Always	10 kΩ or higher
  5 (EI) - 6 (EO)	Always	10 kΩ or higher

If the result is not as specified, replace the sensor.