ULTRASONIC SENSOR (for Front) - INSTALLATION

1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.

Temporarily install the No. 2 ultrasonic sensor retainer to the front bumper.

Text in Illustration
*a	Protrusion
*b	Keyhole

Do not damage the bumper with the protrusion when installing the retainer.

Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

Attach the 2 claws to install the No. 2 ultra sonic sensor retainer.

2. INSTALL NO. 1 ULTRASONIC SENSOR

Use the same procedure to install the No. 1 ultrasonic sensor on the other side.

Attach the 2 claws to install the ultrasonic sensor.

Push the No. 2 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the No. 1 ultrasonic sensor.

3. INSTALL ULTRASONIC SENSOR CLIP

Attach the 4 claws to install the ultrasonic sensor clip.

Hold the No. 1 ultrasonic sensor in place so that the No. 2 ultrasonic sensor retainer does not come out when installing the ultrasonic sensor clip.

4. INSTALL NO. 4 ENGINE ROOM WIRE

w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

Install the No. 4 engine room wire.

Attach the 11 clamps to install the No. 4 engine room wire.

Connect the 2 connectors.

w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

Install the No. 4 engine room wire.

Attach the 12 clamps to install the No. 4 engine room wire.

Connect the 4 connectors.

w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

Install the No. 4 engine room wire.

Attach the 12 clamps to install the No. 4 engine room wire.

Connect the 2 connectors.

5. INSTALL FRONT BUMPER COVER

()