Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
TOYOTA PARKING ASSIST-SENSOR SYSTEM - CUSTOMIZE PARAMETERS
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting /
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Rr Sensor Onset Range | Wide | Sets the buzzer activation range for the rear sensors. | Narrow or Wide |
| Keep Sense Buzzer | Avail | Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. | Not Avail or Avail |
| Fr & Rr Buzzer Volume | H | Changes the buzzer volume setting. | L, M1, M2, M3 or H |
| Display | Default | Contents | Setting |
| Sensor Condition N | Avail | Makes the sensors available when the shift lever is in N. | Not Avail or Avail |
| Front Side Dist Sensor | Long | Sets the buzzer activation range for the front sensors. | Short or Long |
| Reverse Range Front Sensor | Fsde | Changes the operation setting for the vehicle front sensors when the shift lever is in R. | F, Fs,Fc, Fsde or F Stop |
| Non P/R Range Rear Sensor | R Stop | Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. | R, Rcrn or R Stop |
| Display | Default | Contents | Setting |
| Approach Display OFF | Avail | The display when moving away from a previously detected obstacle. | Not Avail or Avail |
| Display Mode | All | The display mode setting (when the intuitive parking assist system is normal). | All or Undisp |
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the engine switch on (IG).
Enter the following menus: Setup / Vehicle / TOYOTA park assist.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Alert volume | 3 | Sets the buzzer activation range for the rear center sensors. | 1, 2, 3, 4 or 5 |
| Display | On | The display mode setting (when the TOYOTA parking assist-sensor system is normal). | On or Off |
| Distance | Wide | Sets the buzzer activation range for the rear center sensors. | Narrow or Wide |