Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
TELEVISION CAMERA (for Rear) - REMOVAL
| 1. REMOVE CENTER BACK DOOR GARNISH |
Detach the 5 clips and 4 claws, and remove the center back door garnish.
| 2. REMOVE BACK DOOR SIDE GARNISH LH |
Detach the 3 clips and 2 claws, and remove the back door side garnish LH.
| 3. REMOVE BACK DOOR SIDE GARNISH RH |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
w/ Power Back Door:
Detach the clip and 4 claws, and remove the back door side garnish RH.
| 4. REMOVE BACK DOOR GARNISH |
Using a screwdriver, detach the 14 clips and remove the back door garnish.
- HINT:
- Tape the screwdriver tip before use.
| 5. REMOVE REAR TELEVISION CAMERA ASSEMBLY |
Using a T30 "TORX" socket wrench, remove the 2 screws.
Detach the 4 claws and remove the rear television camera assembly.
Disconnect the connector.