Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
TELEVISION CAMERA (for Rear) - INSTALLATION
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart ().
| 1. INSTALL REAR TELEVISION CAMERA ASSEMBLY |
Connect the connector.
Attach the 4 claws to install the rear television camera assembly.
Using a T30 "TORX" socket wrench, install the rear television camera with the 2 screws.
| 2. INSTALL BACK DOOR GARNISH |
Attach the 14 clips to install the back door garnish.
| 3. INSTALL BACK DOOR SIDE GARNISH LH |
Attach the 3 clips and 2 claws to install the back door side garnish LH.
| 4. INSTALL BACK DOOR SIDE GARNISH RH |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
w/ Power Back Door:
Attach the clip and 4 claws to install the back door side garnish RH.
| 5. INSTALL CENTER BACK DOOR GARNISH |
Attach the 5 clips and 4 claws to install the center back door garnish.
| 6. ADJUST REAR TELEVISION CAMERA ASSEMBLY |
w/ Side Monitor System:
()
w/o Side Monitor System:
()