Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
STEREO JACK ADAPTER ASSEMBLY - INSTALLATION
| 1. INSTALL HEADPHONE TERMINAL |
Attach the 4 claws to install the headphone terminal.
Install the 2 screws.
Attach the connector clamp.
| 2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY |
Connect the connectors and 2 clamps.
Attach the 8 claws to install the end panel.
| 3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Attach the 2 claws to install the stereo jack adapter.
| 4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect the connectors.
Attach the 14 claws to install the console panel.
| 5. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
Attach the 4 claws to install the box.
| 6. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 9 claws to install the panel.
| 7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Connect the connectors.
Attach the 7 claws to install the panel.
| 8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Attach the 7 claws to install the panel pad.
Install the screw.
Install the clip.
| 10. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.
| 11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and 2 clamps.
Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.
| 13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().