Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
REAR VIEW MONITOR SYSTEM - PROBLEM SYMPTOMS TABLE
- HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| When shift lever is R, rear view monitor image is not displayed (screen is not black). | Reverse Signal Circuit | |
| Proceed to "Image from camera for rear view monitor is abnormal" | ||
| Multi-display assembly | ||
| Multi-media module receiver assembly | ||
| When shift lever is R, rear view monitor image is not displayed (screen is black). | Proceed to "Image from camera for rear view monitor is abnormal" | |
| Multi-display assembly | ||
| Multi-media module receiver assembly | ||
| When the shift lever is not in R, the rear view monitor image is displayed. | Reverse Signal Circuit | |
| Multi-display assembly | ||
| Multi-media module receiver assembly | ||
| Image from the camera for the rear view monitor is abnormal (color, distorted picture). | Proceed to "Image from camera for rear view monitor is abnormal" | |
| Multi-display assembly | ||
| Multi-media module receiver assembly | ||
| When the rear view monitor screen is displayed, the lines are misaligned. (The image from the camera is tilted.) | Check that the camera is correctly installed |