Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING
REAR VIEW MONITOR SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING
- HINT:
- Use the following procedures to troubleshoot the rear view monitor system.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.CUSTOMER PROBLEM ANALYSIS |
|
3.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, replace or recharge the battery before proceeding.
|
4.CHECK DTC OF NAVIGATION SYSTEM |
Refer to the DTC Check / Clear procedures of the navigation system ().
Result | Proceed to |
DTC is not output | A |
DTC is output | B |
|
| ||||
|
5.PROBLEM SYMPTOM CONFIRMATION |
Result | Proceed to |
Symptom does not occur | A |
Symptom occurs | B |
|
| ||||
|
6.SYMPTOM SIMULATION |
|
7.CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEM |
Result | Proceed to |
Symptom does not appear | A |
Symptom appears (Audio and Visual System [w/ Navigation System]) | B |
Symptom appears (Navigation System) | C |
Symptom appears (Rear Seat Entertainment System) | D |
|
| ||||
|
| ||||
|
| ||||
|
8.PROBLEM SYMPTOMS TABLE |
Refer to the Problem Symptoms Table ().
Result | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
|
| ||||
|
9.BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW |
Terminals of ECU ().
|
10.ADJUST, REPAIR OR REPLACE |
|
11.CONFIRMATION TEST |
| ||||
|
---|