REAR SEAT ENTERTAINMENT SYSTEM - Television Display Power Source Circuit

DESCRIPTION

This is the power source circuit of the television display assembly.

Rear Seat Entertainment System - Television Display Power Source Circuit. AUDIO / VIDEO. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

1.CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY AND BODY GROUND)

Disconnect the L53 television display assembly connector.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L53-3 (GND) - Body ground Always Below 1 Ω
L53-4 (GND2) - Body ground Always Below 1 Ω

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
L53-11 (+B2) - Body ground Always 11 to 14 V
L53-1 (+B) - Body ground Always 11 to 14 V

Text in Illustration
*a	Front view of wire harness connector (to Television Display Assembly)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()