Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - VIDEO TERMINAL)
REAR SEAT ENTERTAINMENT SYSTEM - Sound Signal Circuit between Radio Receiver and Video Terminal
DESCRIPTION
This is the sound signal circuit from the video terminal to the multi-media module receiver assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - VIDEO TERMINAL) |
Disconnect the F78 multi-media module receiver assembly connector.
Disconnect the P1 headphone terminal (video terminal) connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F78-7 (VAR+) - P1-5 (VAR+) Always Below 1 Ω F78-8 (VAL+) - P1-6 (VAL+) Always Below 1 Ω F78-15 (VA-) - P1-7 (VA-) Always Below 1 Ω F78-5 (AGND) - P1-15 (SG) Always Below 1 Ω F78-7 (VAR+) - Body ground Always 10 kΩ or higher F78-8 (VAL+) - Body ground Always 10 kΩ or higher F78-15 (VA-) - Body ground Always 10 kΩ or higher F78-5 (AGND) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||