INSPECTION PROCEDURE
CLEAN INFRARED RAY RECEIVING PORTION
CHECK SYSTEM
CHECK REMOTE CONTROL (BATTERY)
REPLACE REMOTE CONTROL
REAR SEAT ENTERTAINMENT SYSTEM - A Remote Control System does not Operate
INSPECTION PROCEDURE
| 1.CLEAN INFRARED RAY RECEIVING PORTION |
Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
- OK:
- The function returns to normal.
Check that the remote control operation of the rear system is not locked by the multi-media module receiver assembly.
Check if "Rear System Locked" appears on the television display.
- OK:
- The message does not appear.
- If the rear system is locked and the remote control is used in the rear seat area, an operation not possible message (for example, "Rear System Locked") is displayed. If the message is displayed, enter the multi-display assembly screen setting, and change "Rear System Lock" to Off.
Text in Illustration| *1 | Television Display Assembly |
| *2 | Multi-display Assembly |
| 3.CHECK REMOTE CONTROL (BATTERY) |
Check that the dry-cell battery of the remote control is not depleted.
- OK:
- Battery is not depleted.
| | REPLACE REMOTE CONTROL BATTERY |
|
|
Replace the remote control with a new or known good one.
Check that the remote control system operates normally.
- OK:
- The remote control system operates normally.
| | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
|
|
|
| OK | |
| |
| END (REMOTE CONTROL WAS DEFECTIVE) |
|
