Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY)
REAR SEAT ENTERTAINMENT SYSTEM - Display Signal Circuit between Radio Receiver and Television Display Assembly
DESCRIPTION
This is the display signal circuit from the multi-media module receiver assembly to the television display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY) |
Disconnect the F78 multi-media module receiver assembly connector.
Disconnect the L53 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F78-1 (NTSO) - L53-20 (NTS4) Always Below 1 Ω F78-2 (NTSG) - L53-19 (SGN4) Always Below 1 Ω F78-3 (SLD2) - L53-18 (SLD4) Always Below 1 Ω F78-1 (NTSO) - Body ground Always 10 kΩ or higher F78-2 (NTSG) - Body ground Always 10 kΩ or higher F78-3 (SLD2) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||