REAR DOOR SPEAKER - INSTALLATION

HINT:

Use the same procedures for the LH side and RH side.

The procedures listed below are for the LH side.

1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)

Rear Door Speaker - Installation. AUDIO / VIDEO. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Align the speaker to the door position pins labeled A.

Install the speaker with the 2 screws.

NOTICE:

Do not touch the cone part of the speaker.

Attach the clamp and connect the connector.

2. INSTALL REAR SPEAKER SET

Temporarily install the speaker by attaching the claw of the speaker to the door panel.

Install the speaker with the 3 screws.

NOTICE:

Do not touch the cone part of the speaker.

Connect the connector.

3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

Connect the connector.

Connect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH to the rear door inside handle sub-assembly LH.

Attach the 4 claws and 9 clips to install the rear door trim board sub-assembly LH.

Install the 3 screws.

4. INSTALL DOOR ASSIST GRIP COVER LH

Attach the 9 claws to install the assist grip cover LH to the rear door trim board sub-assembly LH.

5. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY LH

Connect the connector.

Attach the 7 claws to install the armrest base panel.

6. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH

Attach the 4 claws to install the rear door inside handle bezel LH.

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

AUDIO / VIDEO

Land Cruiser URJ200 URJ202 GRJ200 VDJ200

REAR DOOR SPEAKER