Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
RADIO RECEIVER (w/ Multi-display) - INSTALLATION
| 1. INSTALL NO. 2 RADIO BRACKET |
Install the No. 2 radio bracket with the 3 bolts.
- Torque:
- 3.0 N*m{ 30 kgf*cm, 26 in.*lbf}
| 2. INSTALL NO. 1 RADIO BRACKET |
Install the No. 1 radio bracket with the 3 bolts.
- Torque:
- 3.0 N*m{ 30 kgf*cm, 26 in.*lbf}
| 3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET |
Connect the connectors.
Insert the multi-media module receiver assembly to attach the 5 claws on its backside.
- NOTICE:
- When inserting the multi-media module receiver assembly, do not press the knobs on it.
Install the multi-media module receiver assembly with the 2 screws and 2 bolts.
- Torque:
- Bolt A:
- 12 N*m{ 122 kgf*cm, 9 ft.*lbf}
| 4. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET |
Connect the connectors.
Insert the multi-display assembly and attach the 2 clips and 6 claws on its backside.
- NOTICE:
- When inserting the multi-display assembly, do not press the knobs on it.
Install the multi-display assembly with the 2 screws and 2 bolts.
- Torque:
- Bolt A:
- 12 N*m{ 122 kgf*cm, 9 ft.*lbf}
| 5. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
Connect the connector.
Attach the 6 claws to install the No. 4 instrument panel register.
| 6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
Connect the connector.
Attach the 6 claws to install the No. 3 instrument panel register.
| 7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY |
Attach the 8 claws to install the opening cover.
| 8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Connect the connectors.
Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.
| 9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Attach the 7 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 10. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.
| 11. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and attach the 2 clamps.
Attach the 8 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
| 12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.
| 13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().